Saunalahti expires in short-term!
Here you find setting for another Finnish VoIP provider, NETTIPUHELIN.FI.
I presume a tool called SIP VoIP Settings Tool is installed in the device. You will need Nokia’s new VoIP SIP Settings Tool application. (“http://www.forum.nokia.com/info/sw.nokia.com/id/d476061e-90ca-42e9-b3ea-1a852f3808ec/SIP_VoIP_Settings.html“)
Edit SIP profiles
E72: Select Menu > Ctrl. panel > Settings and Connection > SIP settings.
C6, E7, E8: Select Menu > Settings and Connectivity > Admin. settings > SIP settings
To create a SIP profile, select Options > New SIP profile > Use
default profile
To select the SIP profile you want to use by default for communication sessions, select Options > Default profile.
Select Options > Edit the following:
• Profile name — FI-Perustele3G
• Service profile — IETF
• Default destination — INTERNET
• Default access point — I leave this empty, “Default destination” selects the data highway.
• Public user name — sip:3589315xxxxx@79.134.121.233 (xxxxx rest of your VoIP number)
• Use compression — No
• Registration — When needed
The recommendation is to select “When needed” in the SIP profile registration parameter because then you can control the login and logoff to the VoIP service in the Contacts > VoiP menu.
• Use security — No
Edit SIP proxy servers
Select Options > New SIP profile or Edit > Proxy server.
• Proxy server address — 79.134.121.233
• Realm — 79.134.121.233
• User name — 3589315xxxxx
• Password — Enter your user name and password for the proxy server.
• Allow loose routing — Yes
• Transport type — UDP
• Port — 5060
choose Back
Edit registration servers
Select Options > New SIP profile or Edit > Registrar server.
• Registrar server address — 79.134.121.233
• Realm — leave empty
• Password — Enter your user name and password for the registrar server.
• Transport type — UDP
• Port — 5060
choose Back
Switch the device off and on
To switch off the device, press the power key briefly, and select Switch off!.
To switch on the device: Press and hold the power key.
Create a VOIP profile
Menu > Tools (or Settings) > Connectivity > Net settings > Advanced VoIP settings > Create a new profile
or
Menu > Ctrl. panel > Net settings > Advanced VoIP settings > Create a new profile
or
Menu > Ctrl. panel > Connectivity > Net settings > Advanced VoIP settings > Create a new profile
or
Menu > Settings > Connectivity > Admin.settings > Net settings > Advanced VoIP settings > Create a new profile
Choose “FI-Perustele3G“
Enable SIP over 3G
It’s needed only with the 3G connections but I’ve had problems with a WLAN access point and it was solved when I enabled the AWCDMA setting. There could be some issue in the WLAN access point that it’s not properly seen as WLAN by the VoIP service.
Even though the AWCDMA setting is enabled, it doesn’t mean that the VoIP service would connect over 3G/GPRS. WLAN connection is still the only connection that is used if a WLAN access point (Default destination) is selected in the SIP profile.
Menu > Tools (or Settings) > Connectivity > Net settings > Advanced VoIP settings > VoIP Services
or
Menu > Ctrl. panel > Net settings > Advanced VoIP settings > VoIP Services
or
Menu > Ctrl. panel > Connectivity > Net settings > Advanced VoIP settings > VoIP Services
or
Menu > Settings > Connectivity > Admin.settings > Net settings > Advanced VoIP settings > VoIP Services
Select
FI-Perustele3G profile to edit
Click on Profile Settings
Scroll down to find “AWCDMA“ and set it
AWCDMA — ON
choose Back
VOIP CODECS
Menu > Tools (or Settings) > Connectivity > Net settings > Advanced VoIP settings > VoIP Services
or
Menu > Ctrl. panel > Net settings > Advanced VoIP settings > VoIP Services
or
Menu > Ctrl. panel > Connectivity > Net settings > Advanced VoIP settings > VoIP Services
or
Menu > Settings > Connectivity > Admin.settings > Net settings > Advanced VoIP settings > VoIP
select the FI-Perustele3G profile account to edit.
Then scroll down to find
“Codecs” and set their priority by Options > Move them to place as proposed in the table below.
| Priority |
Nettipuhelin/Perustele |
|
|
WLAN |
3G |
|
|
1 |
iLBC |
iLBC |
|
2 |
G729 |
G729 |
|
3 |
AMR-WB |
AMR-WB |
|
4 |
AMR |
AMR |
|
5 |
PCMU |
PCMU |
|
6 |
PCMA |
PCMA |
|
7 |
CN |
CN |
choose Back
Switch the device off and on
To switch off the device, press the power key briefly, and select Switch off!.
To switch on the device: Press and hold the power key.
Start VoIP Service
E72: To start (register) a service
“Contacts” / “left arrow” / “scroll down arrow” to the VoIP service submenu (showing the name of your Internet profile account, e.g. Provider) / “Options” / “activate service”
E72: The VoIP service can be activated also
when initiating an internet call. If the service is not yet active, the user can activate it when prompted “Internet call service is not active. Activate now?”
E72: The VoIP service stays active until the service is deactivated. To deactivate (unregister) a service
“Contacts” / “left arrow” / “scroll down arrow” to the VoIP service submenu (showing the name defined for your VoIP service, e.g. Provider) / “Options” / “deactivate service”, the device deregisters from SIP server and the connection is released.
E72: A way to stop the SIP account is in the “WLAN scanning” app on the home screen.
Select this app and there are commands to “Enable” and “Disable” the SIP account(s).
C6-00: “Contacts” / “Globe Icon” / “Options” / “activate service”
E71: Menu > Communic. > Internet tel.
If you have selected automatic login, E71 automatically connects to the SIP server.
If you login to the service manually, select an available network from the list and “Select”.
To deregisters from SIP server and to release the connection, select “Options” >”Disconnect from service”.
To receive calls set your STUN Server
Before you go on, please “ACTIVATE” the service. Once successfully activated “DEACTIVATE” the service to make below changes.
Depending on the device, the menu can be found by selecting (note — “NET Settings” application, the older version is called “SIP VoIP Sett.”):
Menu > Tools (or Settings) > Connectivity > Net settings > Advanced VoIP settings > NAT firewall settings > Domain parameters
or
Menu > Ctrl. panel > Net settings > Advanced VoIP settings > NAT firewall settings > Domain parameters
or
Menu > Ctrl. panel > Connectivity > Net settings > Advanced VoIP settings > NAT firewall settings > Domain parameters
or
Menu > Settings > Connectivity > Admin.settings > Net settings > Advanced VoIP settings > NAT firewall settings > Domain parameters
Choose
the profile 79.134.121.233 to edit
Choose
“STUN settings“ and set
| PERUSTELE | |
| STUN Server Address | stun.softjoys.com |
| Port |
3478 |
| Username (xx) |
leave blank (xxx) |
| Password (xx) |
leave blank (xxx) |
| Shared secret (xx) |
“On” |
| Start port (xx) |
-1 |
| End port (xx) |
-1 |
To deactivate a STUN service, set the “STUN Server Address” value to “0.0.0.0″.
(xx) Some older versions of Nokia “VoIP SIP application” or devices do not contain these fields. This does not cause any problems in STUN settings.
(xxx) An actual suggestion is to leave these fields blank.
choose Back
Start VoIP Service
E72: To start (register) a service
“Contacts” / “left arrow” / “scroll down arrow” to the VoIP service submenu (showing the name of your Internet profile account, e.g. Provider) / “Options” / “activate service”
E72: The VoIP service can be activated also
when initiating an internet call. If the service is not yet active, the user can activate it when prompted “Internet call service is not active. Activate now?”
E72: The VoIP service stays active until the service is deactivated. To deactivate (unregister) a service
“Contacts” / “left arrow” / “scroll down arrow” to the VoIP service submenu (showing the name defined for your VoIP service, e.g. Provider) / “Options” / “deactivate service”, the device deregisters from SIP server and the connection is released.
E72: A way to stop the SIP account is in the “WLAN scanning” app on the home screen.
Select this app and there are commands to “Enable” and “Disable” the SIP account(s).
C6-00: “Contacts” / “Globe Icon” / “Options” / “activate service”
E71: Menu > Communic. > Internet tel.
If you have selected automatic login, E71 automatically connects to the SIP server.
If you login to the service manually, select an available network from the list and “Select”.
To deregisters from SIP server and to release the connection, select “Options” >”Disconnect from service”.
Make a call
Make an internet call to a phone number or SIP address
On the home screen, enter the number.
Select Options > Call > Internet call
Good VoIP’ng
